AR9200 V2 is a unique high performance, synthetic ester based additive pack utilising Molybdenum & Nano Tungsten Disulfide (Mo-WS2 ) next-generation lubrication technology, providing advanced anti-wear and friction modification properties to the engine oil in street petrol and diesel or race derived engines.
Synthetic Nano WS2 is one of the most lubricious substances in the world and combined with Molybdenum provides longer-lasting and far superior performance to conventional anti-wear additives. The load bearing ability of the surface treated with AR9200 V2 is extremely high at over 4,200,000 PSI with over 5,000,000 PSI shock load capability, 15 times more than the previous
generation Nano WS2.
AR9200 V2 penetrates and helps restore worn surfaces and the new lubricating micro-thin film provides an ultra-low coefficient of friction (COF 0.03) that prevents sticking, wear, corrosion and oxidation. It is suitable for use in all four stroke petrol or diesel engines, including turbocharged, direct injection, with or without particulate filter (DPF) or three way catalytic convertors (TWC). AR9200 V2 can be added to any viscosity class mineral or synthetic oil with low, medium or full SAPS rating.
FEATURES / BENEFITS
- Low & High Temperature Engine Protection
- Helps Restore Worn Surfaces & Reduces Wear
- Creates Lower Friction Surface (COF 0.03)
- Superior Shock Load Resistance – Over 5,000,000 PSI
- Excellent Penetrating Abilities
- Improves Engine Performance
USAGE INSTRUCTIONS
Recommended treatment Ratio: 40ml AR9200 V2 per litre of engine oil. Acceptable variance +/- 10%.
One 200ml bottle will treat between 4.5 and 5.5L of engine oil.
Shake thoroughly before use. Bring engine up to full operating temperature. Add product and idle engine for 15 minutes. Then use vehicle or equipment normally.
– Akile
I have used this in my 2012 Nissan X Trail for last two oil changes, most recent this week and the engine sound on start up is noticeably quieter afterwards, it is a diesel. Also use other Archoil products alongside, 120 quid a year spent for peace of mind is worth it.
– Dangerous
Improved the gearchange on my Toyota Verso gearbox. Much smoother.
– Roger
I have been using the Diesel fuel additive for a period of time and have been very satisfied with the results.
First time user of this particular product and after less than 600 miles I have noted a distinct reduction in the noise level of the engine shortly after starting off.
If this is a result of the additive after such a short time, then it was a worthwhile investment. I will be keeping a watchful eye for any other improvements that occur to my 18year old MB W211/E270 during the coming months.
– Henry
I added this to my BMW F31 330d after its latest oil/filter change after an email exchange with Andy. The car has done 78k miles and I’ve used Archoil 6900 D Max for over 3 years and 50k miles to great effect.
I’ve done 1000 miles since adding this additive and the difference in sound to the engine when cold starting is very noticeable, much quieter and smoother than before. As the engine warms, the effect remains, much quieter (to the point I can’t hear it when driving gently) and the engine feels more punchy and smooth when accelerating.
I’ve not noticed the fuel efficiency benefits but I’m not concerned about that per se. Having had the car from 1 year old and looking to high mile it, engine care is paramount so I’ll be using this with the oil/filter changes every 7-8,000 miles and the continued use of AR 6900 in every tank.
The Archoil products do exactly what they say on the tin, aid performance whilst keeping the engine and fuelling systems in great shape.
– Chris
I use this along with the Archoil diesel additive and have found quite a significant difference in performance. The engine seems really eager to go after adding to my tuned 2016 Seat leon 184bhp (Now 240bhp) and fuel economy is close to 62mpg on my daily commute. I will use this product after every oil change. This product clearly reduces friction within the engine which can only be a good thing!