ReleaseTech Power Flush is a powerful blend of latest generation detergents, dispersants and esters that rapidly remove deposits from petrol and diesel engine lubrication systems. ReleaseTech Power Flush will safely remove sludge, particulates, gum and varnish from the crankcase and engine components whilst helping restore engine compression lost through stubborn deposit build-up on the cylinder liners. Deposits are dissolved and held in suspension and then disposed when the hot oil is drained. Renewed oil will last longer.
BMW Engine
ReleaseTech Power Flush contains an advanced polymeric lubricant to ensure the engine is fully protected during the cleaning cycle. ReleaseTech Power Flush is suitable for older and modern engines types including petrol, diesel and those with turbo chargers, catalytic converters or particulate filters. ReleaseTech Power Flush is compatible with known engine materials and seals.
Functions
- Rapid But Safe Deposit Removal
- Helps Restore Engine Compression
- Non-Corrosive And TNB Boosting
Benefits
- Extends Life Of Renewed Oil
- Revitalizes Engine Seals
- More Environmentally Friendly
Directions
1 x 250ml can will treat 4 – 8 litres of engine oil.
Bring engine to full operating temperature and then switch off. Add ReleaseTech Engine Flush to existing engine oil. Idle engine for 10 to 15 minutes occasionally increasing engine revs to aid circulation. Switch off engine and drain oil immediately whilst it is still hot. Do not allow the oil to cool or debris will be re-deposited in the crankcase. Replace oil and oil filter as per the manufacturer’s recommendation.
– Mick
use oilsyn to flush on 3 oil changes .on my 222000 mile pd golf 2002 .then add v2 friction modifier ,and ar6900 in fuel ,passed emissions no problem 0.02 on test .very good products in my opinion . i drive 100 plus miles a day car runs so much better on these products !!!