Welcome to powerenhancer - a family run business!

Customer Service & Sales : 01953 456896 Technical Support : 01953 455683 Alternative National Rate : 0844 556 1255

Red Line Limited Slip Friction Modifier - 118ml

PRODUCT CODE: Red 80301
Red Line Limited Slip Friction Modifier is compatible with both petroleum and synthetic gear oils.
Only 18 left

Availability: In Stock

Excl. VAT: £13.11 Incl. VAT: £15.73

Product Description

Details

Limited-slip or Positraction units use plates or clutches to provide the proper amount of lock-up to the differential. Slippery lubricants are required to prevent chatter, but too much slipperiness causes excess wheel spin, reducing traction. For perfect traction, use Red Line 75W90NS and add the Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive until the chatter disappears. Satisfies performance requirements of GM 1052358, Ford M2C118-A, 19B546- MA, Chrysler 4318060 and most imports.

  • Compatible with both petroleum and synthetic gear oils.
  • Reduces break-in temps as much as 50°F.
  • Add 1oz at a time to clutch-type limited slip or posi-traction units to eliminate chatter.
  • Fully-synthetic formulas created from polyol ester base stocks, offer excellent lubrication under extreme conditions.
  • High viscosity-index (VI) to provide relatively constant viscosity and film thickness with varying temperature change.
  • Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears.
  • Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oils.
  • Exceed API GL-5 specifications.
  • Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear.

Recommended Dosage:

Use 4% for prevention of limited slip chatter in broken-in units (typical one 4 oz. bottle) or 4 to 8% for the break-in of new differentials.

Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive will significantly reduce the friction during break-in of differentials. High temperatures encountered in break-in can destroy the hardening of the gear teeth causing rapid wear of the softened gears. This additive can reduce the break-in temperatures by as much as 50°F, improving break-in conditions. Compatible with petroleum or synthetic gear oils. Red Line Gear Oils already contain this additive (except the NS).

In non limited-slip racing differentials and quick change units using the Red Line ShockProof Gear Oils an additional 3 to 6% Red Line Limited-Slip Differential Friction-Modifier / Break-In Additive is recommended.

Downloads

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.