Oilem Hybrogen Road Diesel & Petrol Fuel Conditioner

Rating:
100% of 100
Hybrogen will help clean the fuel system and improve combustion significantly resulting in a cleaner engine and emission control components.

Availability: In stock
SKU
oilem-HR60 DEFAULT
As low as £5.35 £4.46 Regular Price £5.95
FREE UK DELIVERY ON ORDERS OVER £15 inc VAT

Fossil fuels are composed of hydrocarbon chains. It is widely accepted that fuels composed of smaller molecules are the most homogeneous or uniform in structure. Simply, the more structurally uniform a fuel, the cleaner and more consistently it burns. This applies to all type of fossil fuel. A less “dense” fuel such as gas, for example, will comprise of smaller carbon/hydrogen molecules, have a more uniform molecular structure and will burn much cleaner. However, it contains less BTU (energy value) and thus will produce less heat (energy).

Conversely, a very “dense” fuel such as coal is far from uniform in structure with its dense carbon/hydrogen molecules. Although it contains much greater BTU values it will produce much higher emissions as a result. Pump diesel and petrol fall between this spectrum with diesel generally being the less uniform structurally.

As soon as fuel leaves the refinery it starts to degrade and moves away from its ideal state resulting in poorer combustion quality, lower fuel economy and higher exhaust emissions. Many fuels are structurally compromised even before leaving the refinery leading to inconsistency. Fuel additives are used to counter this degradation by dispersing contaminants or actively cleaning carbonaceous matter that has resulted from burning fuel that is or has become less homogeneous. Conventional additive technologies deliver valuable functions such as cleaning, lubrication and protection.

However, few actually improve the fuel structurally. Therefore, more can be done to improve the structural composition of fuel and more importantly to maintain this structural uniformity. Fuels have a fixed BTU value that cannot be manipulated or increased. The goal of Hybrogen is to improve the structure of fuels to maximise the available BTU and deliver the most efficient and cleanest burn possible without the use of conventional dispersants, combustion improvers and metal based catalysts. Hybrogen is completely free of metals and ash.

Functions

  • Cleans the fuel system
  • Removes carbon deposits
  • Helps clean turbo, lambda, CAT and DPF/GPF
  • Improves combustion quality

Benefits

  • Smoother running engine
  • Restored engine performance & fuel economy
  • Reduction in harmful exhaust emissions
  • Lower maintenance costs

Hybrogen takes a unique approach to fuel conditioning by addressing the real time quality of fuel to produce the most homogenous state possible. Acting as a Nano colloid of around 80nm in size it aggressively disperses carbon chains creating a more structurally uniform fuel. In doing so, both diesel and petrol fuels burn cleaner.

The technology behind Hybrogen is over 7 years in the making and has undergone considerable lab and field testing to demonstrate efficacy, consistency and safety. Cleaning of the fuel system is achieved by creating a surfactant function whilst cleaning of the injector tips, combustion area and post combustion area of carbonaceous matter is achieved by natural scavenging as a result of producing much cleaner exhaust gases. By directly addressing the structural quality of the fuel we remove the need for conventional detergents and metal-based combustion improvers.

Hybrogen will help clean the fuel system and improve combustion significantly resulting in a cleaner engine and emission control components. As a result these functions can increase engine torque, reduce fuel consumption, maintenance costs and lower exhaust emissions. Hybrogen does not interfere with fuel system lubricity and will safely remove water from fuel.

Fuel Economy - Negative vs Positive Gain

The mechanisms behind fuel consumption reduction and restoration are commonly misunderstood. There are two important functional baselines. Quality of fuel - The quality of fuel will help determine the quality of combustion, which in turn will influence engine power output, fuel usage and exhaust emissions.

Amount of deposit formation in the fuel system and engine - Over time deposits accumulate in the fuel system and combustion area negatively effecting engine performance, fuel usage and exhaust emissions.

NEGATIVE GAIN is the process of restoring lost engine performance and fuel economy by removing fuel system and engine deposits. This will also have a positive effect on exhaust emissions.

POSITIVE GAIN is the process of improving the quality of combustion resulting in additional engine performance and lower fuel usage above that measured on a clean engine using standard, untreated fuel. This will have an additional positive effect on exhaust emissions.

Hybrogen delivers both function to restore lost fuel economy back to expected baseline figures whilst improving combustion quality to improve performance and fuel usage above that of a clean engine using standard fuel.

 Fuel Economy - Negative vs Positive Gain

Fuel improvements vary depending on the quality of fuel and engine. However, a minimum of 2% should be expected and 5% or more with poor quality fuel and older engine designs providing a significant ROI. Reduced downtime, maintenance costs and crankcase contamination can also be expected.

Results Using Hybrogen Technology 

Road Application

 Fuel Consumption  Other Reported Benefits
Riccardo Consulting Engineers,
Independent Test on Volvo S40 1.8TL using EUDC & EUC15 drive cycle fuel consumption tests, emissions and power tests.
Average 4%+ improvement in fuel consumption. NB. Engine nearly new and very clean.

Average 4.2% improvement in engine power. Visible reduction in smoke opacity.

Queens University Independent
test on Recardo E6/MS test
diesel engine paired with
electrical dynamometer.

Over 12% improvement in fuelconsumption.

Average 14% improvement
in power.

5600 miles test run by
experienced Petroleum Chemist
on diesel road vehicle.
Average 12.6% Improvement. Average full tank range
increased from 497 to 560.3 miles.
Dynamometer test on Nissan 350Z.

Over 6% improvement in power using combined Hybrogen fuel
additive and Oilem oil additive.

Engine more responsive.
Scania R380.

Up to 10% improvement in fuel consumption.

None reported.
Mitsubishi L200.

Average 6.8% improvement in
fuel consumption.

Reduction in carbon build-up.

Dynamometer Report

Directions:

  • 1 part Hybrogen to 3,000 parts fuel (1:3,000).
  • 1ml treats 3 litres of fuel. Ideally, Hybrogen should be added before fuel to aid mixing. This is particularly important where agitation from natural movement of the fuel tank is limited.
  • Pour required amount into fuel tank and then add fuel.

Directions:

  • 1 part Hybrogen to 3,000 parts fuel (1:3,000).
  • 1ml treats 3 litres of fuel. Ideally, Hybrogen should be added before fuel to aid mixing. This is particularly important where agitation from natural movement of the fuel tank is limited.
  • Pour required amount into fuel tank and then add fuel.

Free UK Mainland Shipping for all orders over £15 (inc VAT)

We offer a variety of shipping options to suit your needs and depending on the hazard class of the product and your location. Please note that we don't make any money from our shipping fees.

Depending of the order value and location we cover the shipping cost in full or at least contribute favourably towards the cost.

We strive to ship UK orders the same day providing they are received before 14:00pm and international orders providing they are received before 12:00pm.

To calculate a shipping cost just add the products you require to the cart and follow the first part of the checkout process and it will provide the available options and respective costs.

Guaranteed Damage and Leak Free Delivery or We Will Replace For Free

Great care is needed when packing fluids and very few distributors that specialise in mail order of these types of products are dedicated to the same level of care as us. Our professional and thorough packing is the best in the business and ensures that your order arrives safely. We use strong, high quality, custom made boxes to enable sufficient packing material around each item and thus offer optimum protection against postal damage. And, if any order is damaged, we'll replace it without question. 

DHL Parcels UK Delivery Zones

Zone A Zone B Zone C - £8.00 Zone D - £10.00
Englands & Wales Scotland Highlands / Northern Ireland Offshore islands
AL CM EC HX MK RG SS WC  DD  AB31 to AB38  HS
B CO EN IG N RH ST WD  DG  AB40 to AB56  IV41 to IV49
BA CR EX IP NE RM SW WF  EH  IV1 to IV28  IV51 IV55 & IV 56
BB CT FY KT NG S SY WN  FK  IV30 to IV32  KA27 & KA 28
BD CV GL L NN SA TA WR  G  IV36 to IV40  KW15 to KW17 
BH CW GR LA NP SE TF WS  KA (except KA4 & KA28)  IV52 to IV54  PA20
BL DA GU LD NR SG TN WV  KY  IV63  PA41 to PA49
BN DE HA LE NW SK TQ YO  ML  KW1 to KW14  PA60 to PA78
BR DH HD LL OL SL TR*    TD  PA21 to PA38  PH42 to PH44 
BS DL HG LN OX SM TS    AB1 to AB16  PH4 to PH41   ZE 
CA DN HM LS PE SN TW    AB21 to AB25  PH49 to PH50  Channel Islands
CB DT HP LU PL SO UB    AB30  BT - Northern Ireland   IM - Isle of Man
CF DY HR M PO* SP W    AB39    JE - Jersey - DHL Courier Only
CH E HU ME PR SR WA    PA1 to PA19    GY - DHL Courier Only

*PO30 to PO41 - Isle of Wight - £16.00
*TR21 & TR25 - Isle of Scilly - £16.00

       PH1 to PH3    
           

It is very important to us that our products perform exactly as described and that you are entirely satisfied with your purchase. We stand by all of our products to the degree that we will refund you in full if you are not entirely satisfied.  Even if a particular product or service doesn't work for you and we refund your money in full, we will still go out of our away to help diagnose any underlying issue or fault, free of charge.

Money Back Guarantee

Please inform us of any damaged or defective items within 60 days of delivery and we will replace the item FOC or offer a full refund at our discretion. You may be required to return the damaged or defective item(s). This does not affect the manufacturer’s warranty where it applies.

Similarly, if an order is incorrect in anyway, please notify us within 60 days of purchase. We will endeavour to correct your order as soon as we can. You may be required to return incorrect order items.

If, for any other reason, you wish to return an item then please call us beforehand stating the reason within 60 days of receiving your order. Per our no-quibble money back guarantee, we will provide a refund in full for a single item if you are in any way dissatisfied, even if it has been used. Please note that refunds for opened/used products are limited to one item.

Any additional ordered items are still eligible for a refund but they must be returned unopened, in the original packaging and in the condition they were sent.  A refund will be issued minus the original delivery charge.

Please call or email us for authorisation before returning any items. Refunds will only be credited to the same credit or debit card originally used to purchase the goods.  Again, you will not be asked to jump through any hoops.  We will process the refund and then help diagnose any underlying issue or fault, free of charge.

Write Your Own Review
You're reviewing:Oilem Hybrogen Road Diesel & Petrol Fuel Conditioner
Your Rating