Welcome to powerenhancer - a family run business!

Customer Service & Sales : 01953 456896 Technical Support : 01953 455683 Alternative National Rate : 0844 556 1255

BG Throttle Body & Intake Cleaner

Throttle Body and Intake Cleaner - Carbon Remover
Variant Title Product Code
BG Throttle Body & Intake Cleaner - 566ml Aerosol BG406
BG Throttle Body & Intake Cleaner - Pack of 2 BG406#2
BG Throttle Body & Intake Cleaner - Pack of 3 BG406#3
BG Throttle Body & Intake Cleaner - Pack of 4 BG406#4

Availability: In Stock

From Excl. VAT: £15.79 From Incl. VAT: £18.95

* Required Fields

Product Description


Modern engines are finely tuned and extremely sensitive to deposits that build-up in the fuel/air induction systems.  Varnish, PCV deposits and other accumulated contaminants will interrupt air flow disrupting the critical fuel/air ratio.  This will result in problems such as rough idle, poor fuel economy and increased exhaust emissions.

BG Throttle Body and Intake Cleaner is a blend of cleaning agents which will safely and rapidly remove accumulated deposits from the air throttle body assembly.  It also combines lubricants and anti-corrosion agents which protect these critical components.  Perfectly safe and non corrosive to intake components.  Also safe on oxygen sensors and catalytic converters.

There are various types of  carbon build-up depending on where it in in the intake, level of oil contamination, temperature. Competitor cleaners contain between 2 and 4 different solvents to help remove the different compunds. BG 406 contains 7 different solvents to remove all known types of carbon. That is why it is considered the best and used professionally in the trade.

Comes in a large 418g aerosol can with straw - suitable for multiple cleaning cycles. This is simply the best we have tested and is suitable for all intake and recirculation components such as the EGR for example.




  1. Run engine to normal operating temperature.
  2. For petrol engines this product can be sprayed (in short bursts only) directly into the intake (after the MAS/MAF) whilst the engine is running.  It may be necessary to increase the revs during this operation. Also remove the intake hose and spray directly into the intake/throttle body.  It may be easier to loosen the intake hose and direct the straw into the intake stream.  This will allow the engine to run a more stable idle.
  3. Please note that due to the risk of hydrolock, this product CAN NOT be sprayed directly into the intake of diesel engines, running or otherwise.  Although very effective on diesel engines, it is necessary to remove the intake components (intake pipes, manifold, throttle body, EGR system etc.) and clean such parts manually.



Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.