Boron Motor Silk MS2C-10 (10oz / 280ml) Two Cycle

The Boron CLS Bond® technology in MS2C will bond a near diamond hard solid lubricant directly onto the engine’s metal surfaces. This is especially vital for 2-cycle engines due to excessive carbon build up, heat and wear.

The Boron technology will also prevent corrosion in equipment which is not used on a daily basis and eliminate spark fouling. The service life of 2-cycle engines is extended 2-3 times longer.

FEATURES AND BENEFITS:

Eliminate engine problems due to spark plug fouling, combustion chamber deposits and exhaust port fouling. 

* Increased power
* No "load-up" in the combustion chamber
* Highly lubricious surface
* 100% anti-corrosive thus protecting against downtime
* Maintain clean carburetion
* Eliminates exposure of metal to the environment
* Greater combustionReduce friction heat 40-50%
* Cleaner exhaust
* Maintain clean cylinders thus enhanced compression
* Protects seals against shrinkage and leaks
* Easier starts and smoother operation
* Less noise

 APPLICATIONS:

All lubricated components are coated with a diamond like hardness of Boric Oxide.

 

1. Carb fuel needle valve

2. Carb throttle barrel

3. Carb assembly

4.Crankshaft end

5. Crankshaft inlet port

6. Crankcase

7. Crank counterbalance

8. Crank pin

9. Glow plug

10. Cylinder head

11. Cylinder head button

12. Piston crown

13. Piston pin

14. Piston

15. Connecting rod

16.Recoil pull star

SPECIFICATIONS:

Appearance---------------------- Pale yellow liquid

Boiling point---------------------- 350 F.

Vapor Density-------------------- (Air = 1): >1

Specific gravity ------------------ (H2O = 1): 0.85 at 60/60F (16/16C)

Viscosity ----------------------- 2.8 cST @ 104 F (40C)

Boric acid -------------------------50,000 PPM

Flash point ----------------------- 200F (Estimated)

Packaging: 10oz / 280ml bottle