Boron Motor Silk MSGA-16 (16oz / 500ml ) Petrol Treatment
MotorSilk® Gasoline Fuel System Treatment with patented Hydrogen Orthoborate (Boric Acid) immediately begins to remove debilitating carbon deposits and varnish from fuel injectors, valves, ports, and combustion chamber while performing what no additive can by coating all fuel system mechanical components including the fuel pump with an anti-corrosive and highly lubricious Boric Oxide surface. The inherent problem fuel systems encounter is the eventual buildup of deposits robbing the engine of power, fuel efficiency, performance, and overall drivability.
Deposits are the result of the fuel additive grade, not octane grade, an inexpensive additive package in the fuel results in the accumulation of deposits requiring them to b removed for optimum overall performance. The Boron CLS Bond® technology is most aggressive at removing deposits and maintaining fuel system components in optimum condition.
Deposits impact fuel flow resulting in slower acceleration, power loss, less fuel efficiency, roughness and increased emissions. Carbon acts as a sponge absorbing fuel and leaning the fuel/air mixture adding to power loss, fuel efficiency and increased emissions. Deposits in the combustion causes knocking, pinging, auto-ignition, run-on, acceleration loss, increased NOx.
FEATURES AND BENEFITS:
• Reduce octane requirements
• Eliminate valve knocking and pinging
• Remove carbon and varnish build-up
• Clean out the combustion chamber
• Reduce fuel consumption
• Protect against sulfur on electronic sensors
• Only treat every 10,000 miles for optimum performance
• Protects fuel pump against corrosion and wear
APPLICATION / DIRECTIONS:
May be blended to all gasoline fuels, a 500ml (16oz) bottle treats between 60-90 litres of fuel. Refer to your Owner’s Manual to determine your vehicle fuel capacity and add an appropriate portion of the MotorSilk Petrol Treatment. For larger gas tanks, use additional MotorSilkTM Gas Treatments to maintain the proportions described above. Remove the cap and seal from the MotorSilkTM Gas Treatment bottle and carefully pour the proper portion of the treatment into your gas tank through the gas filler tube. Use every 10,000 miles for maintenance.
SPECIFICATIONS:
Lubricity (Falex B.O.T.D.)-----195) <.300
Color ------------------------ Clear to slight translucent
Base Fluid--------------------Proprietary
Flash point ------------------ 190 deg. F. (ccc)
Viscosity ----------------32.6 - 40.0 SuS @ 100 deg. F.
D.O.T. ---------------- Hazard Class 2.1,
Packing group II Marking: -------- None
Hazardous substance: ./RQ -- Not applicable
Auto ignition temp ---------- >500 Deg. F. / 260 Deg. C.
Vapor Pressure ------------ (mm Hg.) 0.40
Vapor Density --------------(air=1) > 3
